Skip to product information
EM-15 Edge Marker
  • EM-15 Edge Marker
  • EM-15 Edge Marker
  • EM-15 Edge Marker
  • EM-15 Edge Marker
  • EM-15 Edge Marker
  • EM-15 Edge Marker
  • EM-15 Edge Marker
  • EM-15 Edge Marker
EM-15 Edge Marker

EM-15 Edge Marker

30.50 SR

The EM-15 Edge Marker is a quality permanent marker with a cut tip. This makes it easy to color the bevel when you want to find its existing angle and repeat it.

 

Why EM-15 Edge Marker?

  • Easy-to-use permanent marker with Tormek logo.
  • Cut tip for different thickness marking.
  • Color the bevel of your tool to see where on the bevel your grinding wheel is in contact.

The Tormek marker method

The EM-15 Edge Marker is used in the Tormek method for repeating the existing bevel angle of a tool. This means you remove a minimal amount of steel each time you sharpen your tool. Watch the video further down on this page to get a step-by-step instruction.

This marker is alcohol-based and has a tip 1–4.6 mm (0.04–0.18") in size.

How to replicate your bevel angle with the EM-15 Edge Marker

This is how you use the marker to set your sharpening to replicate the existing bevel angle:

  1. Color the bevel, mount your tool in the jig and place it on the universal support with the bevel resting on the grinding wheel.
  2. Turn the grinding wheel forward with your hand and check where on the bevel the color is rubbed off.
  3. Raise or lower the universal support until the color disappears over the entire width of the bevel. The angle is now correct and it's time to start sharpening!

You may also like